3D Systems sPro, User Manual

Page: 238 / 280

SLS p r o c e s s 2 3 8 B O S
u s e r ’ s g u i d e u s i n g t h e B O S w o r k p l a t f o r m
Us i n g t h e B O S Wo r k P l at f o r m
Use the BOS work platform to make breakout
easier. Standing on the 23-cm (9-in) high
platform puts everything on the BOS table within
comfortable reach reduces arm and back fatigue.
Before breakout, after you dock and lock an RCM
in the BOS, place the work platform directly in
front of the BOS. To move the platform, lift the
right side until the wheels on the left side touch
the floor, then roll it like a hand truck.Before
breakout, after you dock and lock an RCM in the
BOS, place the work platform directly in front of
the BOS. To move the platform, lift the right side
until the wheels on the left side touch the floor,
then roll it like a hand truck.
The platform is designed to support one person
weighing 113 kg (250 lb) max.
BOS Pro 230 Work Platform
The work platform provides a non-
slip surface, however, care must be
taken to prevent slipping, tripping,
and falling.