3D Systems sPro, User Manual

Page: 237 / 280

SLS p r o c e s s 2 3 7 B O S
u s e r ’ s g u i d e u s i n g t h e B O S d i a g n o s t i c s m e n u
To view or change valve outputs on the General
Outputs menu:
1
From the Force Output menu, select General
Outputs , then press .
The General Outputs menu appears.
2
From the General Outputs menu, select an
output option; for example Lamp Green , then
press .
3
Use to switch the Lamp Green output
ON or OFF , then, press .
4
Press to save the status, or press to
keep the status as-is and return to the
General Outputs menu.
If you saved a Lamp < Color > output in the ON
state, the corresponding color Stacklight
lamp will remain lit until you change the
output status back to
OFF .
If you saved the RCM Power Relay output in
the ON state, the you will be able to move the
part piston subject to the state of the BOS’s
RCM inputs. If you saved this output in the
OFF state, you will not be able to raise or
lower the part piston.
Valves menu display
General Outputs
>RCM Power Relay
Lamp Green
Lamp Yellow
Lamp Green display
Lamp Green
OFF