3D Systems sPro, User Manual

Page: 172 / 280

SLS p r o c e s s 1 7 2 I R S & I P C
u s e r ’ s g u i d e I R S & I P C t r o u b l e s h o o t i n g
I R S & I P C Tr o u b l e s h o o t i n g
IRS Error Messages
MESSAGE DESCRIPTION ACTION
Input out of Bounds Floating point must be between
bounds. For example, the Percent
Virgin must be greater or equal to
30% and less than or equal to
100% Correct value to within range
RFID Factory Tag Error RFID Tag information is corrupted.
RFID Update Tag Error RFID Tag Updated Information not
valid.
Expired Material IPC Powder has expired
IPC Capacity Error Amount of Powder unloaded from
IPC is greater than contents
IPC Tag Mismatch IPC has changed during the
unloading process Restore IPC originally used for
unload.
IPC Tag Read Failure Communications problem with
RFID reader
Machine Config Missing. Call
Service. Non-Volatile RAM storing sensor
parameters, tare weights, etc. is
missing. Must re-program NVRam
using Setup > Program Factory
Default Parameters menu option. Reprogram NVRam.
Blended Powder Empty The Blended Powder bin empty.
No powder will be sent to the
Sinterstations until more powder
is blended. Provide the Virgin and Used
Powder so a new batch can be
prepared.