3D Systems sPro, User Manual

Page: 234 / 280

SLS p r o c e s s 2 3 4 B O S
u s e r ’ s g u i d e u s i n g t h e B O S d i a g n o s t i c s m e n u
VIEW OR CHANGE INPUT STATUS
Choose an input on the Input Status menu to
view or change.
L
You must connect the RCM to the BOS before
you can change the status of any BOS’s RCM
inputs.
1
From the Input Status menu, choose Move
RCM Up , Move RCM Down , or RCM Present ,
then press .
The status of the selected input appears; OFF
or ON .
2
Use to change the input status to OFF
or ON .
3
Press to save the status, or press to
keep the status as-is and return to the Input
Status menu.
If you saved Move RCM Up or Move RCM
Down input in the ON state, the piston will
move to its upper or lower limit until you
change the status back to OFF before it
reaches
To access the Force Output menu
Use the Force Output menu to view and change
the status of BOS outputs.
From the Diagnostics menu, choose Force
Output , then press .
The Force Output menu appears.
L
If you see an Access Denied display at this
point, you are not authorized to change BOS
outputs. Press
to return to the Setup menu
and contact 3D Systems Customer Support for
assistance.
Press to choose the output you want to
view or change, then press .
Keep hands and loose clothing
clear of RCM before part piston
motion is enabled.
Move RCM Down
OFF
Move RCM Down display
Force Output
>Valves
General Outputs
Force Output menu display