3D Systems sPro, User Manual

Page: 77 / 280

SLS p r o c e s s 7 7 B U I L D P A R T S
u s e r ’ s g u i d e m e s s a g e s i n t h e S i n t e r a p p l i c a t i o n
M e s s a g e s i n t h e S i nt e r Ap p l i c at i o n
When Sinter is running various types of messages appear in the Message List window (described
below). Alarm and warning messages also appear in pop-up windows you must acknowledge.
About the Message List window
The Sinter application displays messages in a
Message List window:
New messages appear at the top of the window;
old messages scroll down as new ones appear.
Messages are color coded to indicate their type.
You can select a message and then right-click to
acknowledge it; after you do so, it turns black,
whatever its initial color was.
See Responding to Messages in Sinter Help for
more information on acknowledging messages.
Message Types in Sinter
TYPE COLOR SOUND DEFINITION
Message Black None
Informational only or tells of a minor error. These generally occur when
you enter different data than the system expects or when a
dependency is not met.
Advisory Yellow Pulsing horn
Something occurred that can turn into an alarm condition if not
corrected in a specified time.
Warning Yellow Pulsing horn
Something serious may occur that you should attempt to correct; does
not terminate the build.
Alarm Red Steady horn
Indicates something occurred that will halt the current operation and
return the SLS system to a safe state.