3D Systems sPro, User Manual

Page: 82 / 280

SLS p r o c e s s 8 2 B U I L D P A R T S
u s e r ’ s g u i d e r e s t a r t i n g a t e r m i n a t e d b u i l d
R e s t a r t i n g a Te r m i n at e d B u i l d
If you terminate a build before completion, you
may be able to restart it. This depends on the
material in use and the temperature at which you
were running the build.
L
When you restart a build, it resumes building at
the layer it was on when the build was
terminated. Therefore, if the part piston was
moved after you terminated the build, some
parts in the build might be ruined.
Keep the following in mind:
`
After restarting the build, you may need to
increase the laser power for the first few
layers to make sure the layers bond properly.
`
Make sure the powder is feeding properly