3Com Switch 5500 Family
Quick Reference Guide
ftp { cluster | remote-server } source-interface
Use the
ftp { cluster
| remote-server } source-interface
command to use a specified source
interface to establish a connection with an FTP server.
User view
ftp { cluster | remote-server } source-ip
Use the
ftp { cluster | remote-server } source-ip
command to use a specified source IP address
to establish a connection with an FTP server.
User view
ftp dir
Use the
dir
command to query a specified file.
FTP Client view
ftp disconnect
Use the
ftp disconnect
command to terminate the FTP connection of a specified user at the FTP server
end.
System view
ftp-server
Use the
ftp-server
command to configure a public FTP server on the management device for cluster
members.
Cluster view
ftp server enable
Use the
ftp server enable
command to enable FTP server and allow FTP users to log in.
System view
ftp-server source-interface
Use the
ftp-server source-interface
command to specify source interface for the FTP server.
System view
ftp-server source-ip
Use the
ftp-server source-ip
command to specify source IP address for the FTP server.
System view
ftp source-interface
Use the
ftp source-interface
command to specify source interface for the FTP client.
System view
ftp source-ip
Use the
ftp source-ip
command to specify source IP address for the FTP client.
System view
ftp timeout
Use the
ftp timeout
command to configure connection timeout interval.
System view
garp timer
Use the
garp timer
command to set the GARP Hold, Join or Leaver timer of the port to a specified value.
Ethernet Port view
garp timer leaveall
Use the
garp timer leaveall
command to set the GARP LeaveAll timer to a specified value.
System view
gateway-list
Use the
gateway-list
command to configure one or multiple gateway IP addresses for the DHCP clients
of a DHCP address pool.
DHCP Address Pool view
get
Use the
get
command to download a remote file and save the file to the local device.
FTP Client Command view
gratuitous-arp learning enable
Use the
gratuitous-arp-learning enable
command to enable the gratuitous ARP packet learning
function.
System view
gvrp
Use the
gvrp
command to enable GVRP globally (in system view) or on a port (in Ethernet port view).
System view
Ethernet Port view
