3Com Switch 5500 Family
Quick Reference Guide
preference
Using the
preference
command, you can configure the OSPF protocol route preference.
OSPF view
preference
Use the
preference
command to configure the route preference of RIP.
RIP view
primary accounting
Use the
primary accounting
command to configure a primary TACACS accounting server.
HWTACACS view
primary authentication
Use the
primary authentication
command to configure a primary TACACS authentication server.
HWTACACS view
primary authorization
Use the
primary authorization
command to configure a primary TACACS authorization server.
HWTACACS view
priority
Use the
priority
command to configure the priority of Ethernet port.
Ethernet Port view
priority trust
Use the
priority trust
command to configure the system to trust the packet’s 802.1p priority and not
replace the 802.1p priorities carried by the packets with the port priority.
Ethernet Port view
protocol inbound
Use the
protocol inbound
command to configure the protocols supported in the current user interface.
VTY User Interface view
protocol-priority protocol-type
Use the
protocol-priority
command to set the global traffic priority that applies to a given protocol.
System view
protocol-vlan
Use the
protocol-vlan
command to specify a VLAN is a specified type of protocol-based VLAN.
VLAN view
public-key-code begin
Use the
public-key-code begin
command to enter public key edit view and input the client public key.
Public Key Edit view
public-key-code begin
Use the
public-key-code begin
command to enter public key edit view and set server public keys.
Public Key Edit view
public-key-code end
Use the
public-key-code end
command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
put
Use the
put
command to upload a local file to the remote SFTP server.
SFTP Client view
pwd
Use the
pwd
command to display the current directory on the SFTP server.
SFTP Client view
queue-scheduler
Use the
queue-scheduler
command to configure queue scheduling mode.
Ethernet Port view
quit
Use the
quit
command to terminate the connection to the remote SSH server.
User view
quit
Use the
quit
command to terminate the connection to the remote SFTP server and exit to system view.
SFTP Client view
