3Com Switch 5500 Family
51
Quick Reference Guide
ssh user username authentication-type
Use the
ssh user username authentication-type
command to define authentication type for a
designated user.
System view
ssh2
Use the
ssh2
command to enable the connection between SSH client and server, define key exchange
algorithm preference, encryption algorithm preference and HMAC algorithm preference on the server and
client.
System view
ssh2 source-interface
Use the
ssh2 source-interface
command to specify source interface for the SSH2 client.
System view
ssh2 source-ip
Use the
ssh2 source-ip
command to specify source IP address for the SSH2 client.
System view
standby detect-group
Use the
standby detect-group
command to specify to enable the VLAN interface backup function by using
the auto detect function.
VLAN Interface view
state
Use the
state
command to configure the state of the current ISP domain/current user.
ISP Domain view
Local User view
state
Use the
state
command to configure the state of RADIUS server.
RADIUS Scheme view
static-bind ip-address
Use the
static-bind ip-address
command to specify an IP address which will be bound statically to a
MAC address.
DHCP Address Pool view
static-bind mac-address
Use the
static-bind mac-address
command to specify a MAC address to which an IP address will be
bound statically.
DHCP Address Pool view
static-rp
Use the
static-rp
command to configure static RP.
PIM view
static-rpf-peer
Use the
static-rpf-peer
command to configure a static RPF peer.
MSDP view
startup bootrom-access enable
Use the
startup bootrom-access enable
command to enable the user to enter the main Boot Menu with
customized password.
User view
startup saved-configuration
Use the
startup saved-configuration
command to assign the main or backup attribute to a configuration
file on one switch or all switches in the fabric so as to use this file as the main or backup startup configuration
file of the switch(es) upon next startup.
User view
stop-accounting-buffer enable
Use the
stop-accounting-buffer enable
command to configure to save the stopping accounting
requests without response in the Switch buffer.
RADIUS Scheme view
stopbits
Use the
stopbits
command to configure the stop bits on the AUX (Console) port.
User Interface view
stp
Use the
stp
command to enable/disable MSTP globally or for a port.
System view
Ethernet Port view
