3Com Switch 5500 Family
Quick Reference Guide
stub
Using the
stub
command, you can configure the type of an OSPF area as “stub”.
OSPF Area view
summary
Use the
summary
command to activate RIP-2 automatic route summarization. This is the default.
RIP view
super
Use the
super
command to give users access to a higher level than their currently assigned user level.
Any view
super password
Use the
super password
command to configure the password for changing the user from a lower level to a
higher level.
System view
sysname
Use the
sysname
command to configure the host name of the Switch.
System view
sysname
Use the
sysname
command to change the name of the fabric.
System view
sysname
Use the
sysname
command to set the system name of the Switch.
System view
system-view
Enter
system-view
to enter the system view from the user view.
User view
tcp timer fin-timeout
Use the
tcp timer fin-timeout
command to configure the TCP finwait timer.
System view
tcp timer syn-timeout
Use the
tcp timer syn-timeout
command to configure the TCP synwait timer.
System view
tcp window
Use the
tcp window
command to configure the size of the transmission and receiving buffers of the
connection-oriented Socket.
System view
telnet
Use the
telnet
command to log in to another Ethernet switch from the current switch via Telnet for remote
management.
User view
telnet-server source-interface
Use the
telnet-server source-interface
command to specify source interface for the Telnet server.
System view
telnet-server source-ip
Use the
telnet-server source-ip
command to specify source IP address for the Telnet server.
System view
telnet source-interface
Use the
telnet source-interface
command to specify source interface for the Telnet client.
System view
telnet source-ip
Use the
telnet source-ip
command to specify source IP address for the Telnet client.
System view
terminal debugging
Use the
terminal debugging
command to configure to display the debugging information on the terminal.
User view
terminal logging
Use the
terminal logging
command to start logging the information displayed on the terminal.
User view
