3Com Switch 5500G-EI PWR 48-Port, Quick Reference Manual

Page: 48 / 59

3Com Switch 5500 Family
Quick Reference Guide
secondary accounting
Use the
secondary accounting
command to configure a secondary TACACS accounting server.
HWTACACS view
secondary authentication
Use the
secondary authentication
command to configure a secondary TACACS authentication server.
HWTACACS view
secondary authorization
Use the
secondary authorization
command to configure a secondary TACACS authorization server. Use
the
undo secondary authorization
command to delete the configured secondary authorization server.
HWTACACS view
security-policy-server
Use the
security-policy-server
command to configure the IP address of a security policy server.
RADIUS Scheme view
self-service-url
Use the
self-service-url
command to either configure the self-service server URL or remove the
self-service URL.
ISP Domain view
send
Use the
send
command to send messages to other user interfaces.
User view
server-type
Use the
server-type
command to configure the RADIUS server type supported by the Switch.
RADIUS Scheme view
service-type
Use the command
service-type
to configure which level of command a user can access after login.
Local User view
service-type
Use the
service-type
command to configure a service type for a particular user.
Local User view
service-type multicast
Use the
service-type multicast
command to set the current VLAN as a multicast VLAN.
VLAN view
set authentication password
Use the
set authentication password
command to configure the password for local authentication.
User Interface view
set unit name
You can use this command to set a name for a device.
System view
sftp
Use the
sftp
command to establish a connection to the SFTP server and enter SFTP client view.
System view
sftp server enable
Use the
sftp server enable
command to enable the secure FTP (SFTP) server.
System view
sftp source-interface
Use the
sftp source-interface
command to specify source interface for the SFTP client.
System view
sftp source-ip
Use the
sftp source-ip
command to specify source IP address for the SFTP client.
System view
sftp time-out
Use the
sftp time-out
command to set the timeout time for the SFTP user connection.
System view
shell
Use the
shell
command to enable the terminal service for a user interface. The terminal service is enabled
by default.
User Interface view