3Com Switch 5500G-EI PWR 48-Port, Quick Reference Manual

Page: 49 / 59

3Com Switch 5500 Family 49
Quick Reference Guide
shutdown
Use the
shutdown
command to shut down the specified MSDP peer.
MSDP view
silent-interface
Using the
silent-interface
command, you can prevent an interface from transmitting OSPF packets.
OSPF view
snmp-agent community
Use the
snmp-agent community
command to set the community access name and enable access to SNMP.
System view
snmp-agent group
Using the
snmp-agent group
command, you can configure a new SNMP group and reference the ACL to
perform ACL control to the network management users by
acl
acl-number .
System view
snmp-agent group
Use the
snmp-agent group
command to configure a new SNMP group, that is, map an SNMP user to
SNMP view.
System view
snmp-agent local-engineid
Use the
snmp-agent local-engineid
command to configure a name for a local or remote SNMP engine
on the Switch.
System view
snmp-agent log
Use the
snmp-agent log
command to enable the network management operation logging function.
System view
snmp-agent mib-view
Use the
snmp-agent mib-view
command to create or update the view information.
System view
snmp-agent packet max-size
Use the
snmp-agent packet max-size
command to configure the size of SNMP packet that the Agent can
send/receive.
System view
snmp-agent sys-info
Use the
snmp-agent sys-info
command to set system information such as geographical location of the
device, contact information for system maintenance and version information of running SNMP.
System view
snmp-agent target-host
Use the
snmp-agent target-host
command to select and configure the host that you want to receive
SNMP notification.
System view
snmp-agent trap enable
Use the
snmp-agent trap enable
command to enable the device to send Trap message.
System view
snmp-agent trap enable ospf
Use the
snmp-agent trap enable ospf
command to enable the OSPF TRAP function.
System view
snmp-agent trap life
Use the
snmp-agent trap life
command to set the timeout of Trap packets.
System view
snmp-agent trap queue-size
Use the
snmp-agent trap queue-size
command to configure the information queue length of Trap packet
sent to destination host.
System view
snmp-agent trap source
Use the
snmp-agent trap source
command to specify the source address for sending Traps.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new user to an SNMP group, and reference the ACL to
perform ACL control to the network management users by acl acl-number.
System view