3Com Switch 5500 Family
31
Quick Reference Guide
igmp version
Use the
igmp version
command to specify the version of IGMP that a router uses.
VLAN Interface view
import-route
Using the
import-route
command, you can import the external routing information of another routing
protocol.
OSPF view
import-route
Use the
import-route
command to import the routes of other protocols into RIP.
RIP view
import-source
Use the
import-source
command to specify the (S, G) entries in this domain that need to be advertised
when an MSDP peer creates an SA message.
MSDP view
info-center channel name
Use the
info-center channel name
command to rename a channel specified by the
channel-number
as
channel-name.
System view
info-center console channel
Use the
info-center console channel
command to configure the channel through which the log
information is output to the console.
System view
info-center enable
Use the
info-center enable
command to enable the system log function.
System view
info-center logbuffer
Use the
info-center logbuffer
command to configure output information to the memory buffer.
System view
info-center loghost
Use the
info-center loghost
command to set the IP address of the info-center loghost to send information
to it.
System view
info-center loghost source
Use the
info-center loghost source
command to set the source address of packets sent to the loghost
as the address of the interface specified by the
interface-name
parameter.
System view
info-center monitor channel
Use the
info-center monitor channel
command to set the channel to output the log information to the
user terminal.
System view
info-center snmp channel
Use the
info-center snmp channel
command to specify new channel for transmitting the SNMP
information.
System view
info-center source
Use the
info-center source
command to add/delete a record to the information channel.
System view
info-center switch-on
Use the
info-center switch-on
command to turn on the information synchronization switch of the
specified switch.
System view
info-center synchronous
Use the
info-center synchronous
command to enable the synchronous information output function.
System view
info-center timestamp
Use the
info-center timestamp
command to configure the timestamp output format in debugging/trap
information.
System view
