3Com Switch 5500 Family
Quick Reference Guide
timer quiet
Use the
timer quiet
command to set the waiting time before the primary server resumes the active state.
HWTACACS view
timer realtime-accounting
Use the
timer realtime-accounting
command to set the real-time accounting interval.
HWTACACS view
timer response-timeout
Use the
timer response-timeout
command to set the TACACS server response timeout time.
HWTACACS view
timer retry
Use the
timer retry
command to configure a connection request retry interval.
MSDP view
timer wait
Use the
timer wait
command to set the timeout time for detect operations.
Detecting Group view
timers
Use the
timers
command to modify the values of the three RIP timers: period update, timeout, and
garbage-collection.
RIP view
tracert
Use the
tracert
command to check the reachability of network connection and troubleshoot the network.
Any view
traffic-limit
Use the
traffic-limit
command, to activate the ACL and perform traffic limitation.
Ethernet Port view
traffic-limit
Use the
traffic-limit
command to add traffic policing action in the QoS profile, with the granularity of 64
kbps.
QoS Profile view
traffic-priority
Use the
traffic-priority
command to activate an ACL and perform priority marking.
Ethernet Port view
traffic-priority
Use the
traffic-priority
command to enable traffic priority marking for traffic that matches the ACL.
QoS Profile view
traffic-redirect
Use the
traffic-redirect
command to activate the ACL to recognize and redirect the traffic (whose action
is permit).
Ethernet Port view
traffic-share-across-interface
Use the
traffic-share-across-interface
command to enable traffic sharing across RIP interfaces to
averagely distribute the traffic to the RIP interfaces of the router through equal-cost routes.
RIP view
traffic-statistic
Use the
traffic-statistic
command to activate the ACL to recognize and count the traffic (whose action
is permit).
System view
udp-helper enable
Use the
udp-helper enable
command to enable the UDP Helper function.
System view
udp-helper port
Use the
udp-helper port
command to configure the UDP port with relay function.
System view
udp-helper server
Use the
udp-helper server
command to configure the relay destination server.
VLAN Interface view
undelete
Use the
undelete
command to recover the deleted file.
User view
