![background image](http://html1.mh-extra.com/html/3com/superstack-3-nbx/superstack-3-nbx_administrators-manual_3109332079.webp)
Configuring VPIM Parameters Using the NBX NetSet Utility
79
Configuring VPIM
Parameters Using
the NBX NetSet
Utility
Using the NBX NetSet utility, you can configure several VPIM control
parameters, check the status of the VPIM queues, and obtain statistics on
recent VPIM activity.
VPIM Control
Parameters
To set the VPIM control parameters:
1
In the
NBX NetSet - Main Menu
window, click
NBX Messaging
.
2
Click the
VPIM
tab. See Figure 23. Table 15 describes the fields.
Figure 23
VPIM Tab
Table 15
VPIM Tab Fields
Field
Purpose
Max message size
Controls the size of incoming messages from other
sites. If a message is larger than the specified
value, the NBX system rejects it. The default value
represents a voice mail message approximately 4
to 5 minutes in length.
Default: 3000 Kbytes
Summary of Contents for SuperStack 3 NBX
