3Com SuperStack 3 NBX, Administrator'S Manual

Page: 231 / 496

Connecting and Managing Analog Devices 231
Figure 79 Device Status Dialog Box
5 View the device status and make any necessary changes. Table 40
describes each Device Status field.
Table 40 Device Status Fields
Field Purpose
MAC Address The hardware address of this Single-Port Analog Terminal
Adapter (ATA) or of the port on a 4-Port Analog Terminal
Card.
NOTE : The ports on a 3C10114 4-Port Analog Terminal
Card have sequential MAC addresses.
The ports on a 3C10114C 4-Port Analog Terminal Card
have the same MAC address, and a Virtual Device
Number (VDN), in square brackets after it, provides a
unique identifying number to each port.
Name A name to help identify this ATA or port.
Extension The extension number assigned to the device connected
to this ATA or ATC port.
Status The state of the ATA or ATC port when it was last
involved in a call. Devices send status messages to the
Call Processor every 30 seconds.
Software Version The software version downloaded to this ATA or 4-Port
Analog Terminal Card and used by the Digital Signal
Processors (DSPs).