3Com SuperStack 3 NBX, Administrator'S Manual

Page: 319 / 496

Configuring and Managing T1 Digital Line Cards 319
Figure 137 DSP Status Window
5 Click Close to close the DSP Status window.
6 Click Apply to make the changes.
7 Click OK .
Modifying IP Settings
for a T1 Card
You can modify the IP settings for a T1 Digital Line Card to meet
changing requirements.
The board must be on the same subnetwork as the Call Processor to
modify IP settings.
To modify the IP settings of a T1 Digital Line Card:
1 In the NBX NetSet - Main Menu window (Figure 97), click
Device Configuration and then the Digital Line Cards tab. See Figure 98.
2 From the Select Device Type pull-down list, select T1/ISDN Board List and
click Apply .
3 Select the board for which you want to change the IP settings and click IP
Settings (Figure 92).
If the dialog box has no IP Settings button, you have not yet installed the
IP licenses. You must install them before you can proceed.