Configuring and Managing BRI-ST Digital Line Cards
245
4
Select
Restricted
from the
Trunk to Trunk
pull-down list.
CAUTION:
If you select
Un
restricted, users can transfer incoming calls to
outgoing trunks. 3Com does not recommend this setting because it
enables the possibility of toll fraud.
5
Click the
On Line
check box.
6
Enter
500
in each of the four
AutoExt
text boxes.
7
Click
OK
.
Verifying BRI Group Membership
To verify that all channels are in the member list:
1
On the
Digital Line Cards
tab, from the
Select Device Type
list, select
BRI
Group List
and then click
Apply
.
2
Select the group you want, and click
Membership
(Figure 83).
Figure 83
Manage Group Membership Dialog Box
3
Scroll through the
Member List
to verify that all eight channels are
present.
4
To transfer a channel from the non-member list to the member list, select
the channel and click <<.
You cannot transfer a channel from the Member List to the Non-Member
list.
Summary of Contents for SuperStack 3 NBX
