![background image](http://html1.mh-extra.com/html/3com/superstack-3-nbx/superstack-3-nbx_administrators-manual_3109332256.webp)
256
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Viewing Digital Signal Processor Status
To view DSP (Digital Signal Processor) details:
1
Return to the
Digital Line Cards
tab.
2
From the
Select Device Type
list, select
T1/ISDN Board List
and click
Apply.
3
Select the BRI board you want and click
Status
.
4
In the Board Status dialog box, select a DSP from the
DSP List
and click
Details.
The DSP Status window
(
Figure 91) appears.
Figure 91
DSP Status Window — BRI
5
Click
Close
to close the
DSP Status
window.
6
Click
OK
.
Modifying IP Settings
for a BRI Card
You can modify the IP settings for a Digital Line Card to meet changing
requirements.
The board must be on the same subnetwork as the Call Processor to
modify IP settings.
Summary of Contents for SuperStack 3 NBX
