Configuring the ISDN BRI Digital Line Card
261
CAUTION:
When you insert the BRI Digital Line Card, it begins an
initialization sequence. Also, because you enabled the Auto Discover
Digital Line Cards check box, the system recognizes the addition of the
BRI card and begins to update its database. Allow 3 minutes for both of
these processes to be completed.
Configuring the
ISDN BRI Digital
Line Card
This section tells you how to use NetSet to set up your BRI Digital Line
Card parameters. Before you configure the BRI card, you must configure
the NBX 100 Dial Plan. See Chapter 2 for detailed information on the dial
plan.
Configuring for ISDN
BRI Signaling
This section describes how to configure a BRI Digital Line Card for ISDN
BRI (Basic Rate Interface) signaling.
CAUTION:
Before you begin to configure the BRI card, you must wait 3
minutes after inserting the BRI card into the chassis.
Perform these steps.
1
In the NBX NetSet - Main Menu, click the
Device Configuration
icon.
2
Select the
Digital Line Cards
tab.
3
Use the MAC address of the BRI card (you recorded this address before
inserting the card into the chassis) to identify the card in the T1/ISDN
Board List.
4
Select the BRI card from the list and click
Modify
.
Summary of Contents for NBX 100
