6
3Com Switch 4500G Family
Command Reference
check region-configuration
Use the
check region-configuration
command to view all the MST region configuration information,
including the region name, VLAN-to-instance mapping and revision level settings.
MST Region view
checkzero
Use the
checkzero
command to check the zero field of RIP-1 packet.
RIP view
checkzero
ciphersuite
Use the
ciphersuite
command to configure the cipher suite supported by an SSL server policy.
SSL Server Policy view
classifier behavior
Use the
classifier behavior
command to specify the behavior for the class in the policy.
Policy view
client-verify enable
Use the
client-verify enable
command to enable certificate-based SSL client authentication, meaning
the server needs to perform certificate-based authentication to the client.
SSL Server Policy view
clock datetime
Use the
clock datetime
command to set the current system time and date.
User view
clock summer-time
Use the
clock summer-time
command to set the name, starting and ending time of the daylight saving time.
User view
clock timezone
Use the
clock timezone
command to set local time zone information.
User view
close
Use the
close
command
to
terminate the connection to the FTP server, but remain in FTP client view.
FTP Client view
close-mode wait
Use the
close-mode wait
command to configure the close mode for an SSL connection to
wait
, meaning
after sending a close-notify alert message to the client, the server does not close a session until it receives
a close-notify alert message from the client.
SSL Server Policy view
cluster
Use the
cluster
command to enter cluster view.
System view
cluster enable
Use the
cluster enable
command to enable the cluster function on a switch.
System view
cluster switch-to
Use the
cluster switch-to
command to switch between the management device and member devices
for configuration and management.
User view
command-privilege level
Use the
command-privilege level
command to set the level of the specified command in a specified view.
System view
common-name
Use the
common-name
command to specify the common name of an entity, take User name for example.
PKI Entity view
copy
Use the
copy
command to copy a file.
User view
copy configuration
Use the
copy configuration
command to copy configurations on a specific interface to other interface(s).
The configuration can be copied include speed/duplex configuration, GVRP, STP, Port-isolate, VLAN,
LACP, and QoS.
System view
