8
3Com Switch 4500G Family
Command Reference
delete static-routes all
Use the
delete static-routes all
command to delete all the static routes.
System view
description
Use the
description
command to assign a description string to the current VLAN or VLAN interface.
VLAN view
VLAN Interface view
description
Use the
description
command to enter a description of an Ethernet port.
Ethernet Interface view
description
Use the
description
command to create an ACL description, to describe the purpose of the ACL for
example.
Basic IPv4 ACL view
Advanced IPv4 ACL view
Ethernet Frame Header ACL view
description
Use the
description
command to give a brief description of a test group, usually, the test type or test
purpose of a test group.
NQA Test Group view
destination-ip
Use the
destination-ip
command to configure the destination IP address in the test request packet.
NQA Test Group view
destination-port
Use the
destination-port
command to configure the destination port number for a test request packet.
NQA Test Group view
dhcp enable
Use the
dhcp enable
command to enable DHCP.
System view
dhcp relay address-check
Use the
dhcp relay address-check
enable
command to enable IP address match checking on the relay
agent.
VLAN Interface view
dhcp relay information enable
Use the
dhcp relay information enable
command to enable the relay agent to support option 82.
VLAN Interface view
dhcp relay information format
Use the
dhcp relay information format
command to specify a padding format for option 82.
Interface view
dhcp relay information strategy
Use the
dhcp relay information strategy
command to configure DHCP relay agent handling strategy
for messages containing option 82.
Interface view
dhcp relay release
Use the
dhcp relay release
command to send a DHCP RELEASE request to a specified DHCP server or
server groups for releasing a specified client IP address.
VLAN Interface view
System view
dhcp relay security static
Use the
dhcp relay security static
command to configure a manual IP-to-MAC binding on the relay
agent.
System view
dhcp relay security tracker
Use the
dhcp relay security tracker
command to set a refreshing interval at which the relay agent
contacts the DHCP server for refreshing dynamic bindings.
System view
dhcp relay server-detect
Use the
dhcp relay server-detect
command to enable pseudo DHCP server detection on the DHCP
relay agent.
System view
