50
3Com Switch 4500G Family
Command Reference
tftp sget
Use the
tftp sget
command to download in security mode the file from the specified directory on the TFTP
server and save it on the local device.
User view
tftp-server
Use the
tftp-server
command to configure a TFTP server for cluster members on the management
device.
Cluster view
tftp-server acl
Use the
tftp-server acl
command to reference an ACL to control access to the TFTP server.
System view
timeout
Use the
timeout
command to configure the probe time-out time. If no response packet is received within
the time-out time of a request packet, the probe fails.
NQA Test Group view
time-range
Use the
time-range
command to create a time range.
System view
timer
Use the
timer
command to set the interval to send handshake packets.
Cluster view
timers
timer quiet
Use the
timer quiet
command to set the wait time for the primary server to restore the active state.
RADIUS Scheme view
timer quiet
Use the
timer quiet
command to set the duration that a primary server must wait before it can resume the
active state.
Scheme view
timer realtime-accounting
Use the
timer realtime-accounting
command to set the real-time accounting interval.
RADIUS Scheme view
timer realtime-accounting
Use the
timer realtime-accounting
command to configure a real-time accounting interval.
Scheme view
timer response-timeout
Use the
timer response-timeout
command to set the response timeout time of RADIUS servers.
RADIUS Scheme view
timer response-timeout
Use the
timer response-timeout
command to set the response timeout time of TACACS servers.
Scheme view
timers
Use the
timers
command to adjust RIP timers.
RIP view
topology accept
Use the
topology accept
command to confirm the current topology information of the cluster and save that
as a standard topology.
Cluster view
topology restore-from
Use the
topology restore-from
command to obtain and restore the standard topology information from
the local flash.
Cluster view
topology save-to
Use the
topology save-to
command to save the standard topology information into the local flash.
Cluster view
tos
Use the
tos
command to assign a value to the ToS field in the header of HWPing test packets.
NQA Test Group view
