3Com 4500G 3CR17761-91, Quick Reference Manual

Page: 51 / 52

3Com Switch 4500G Family 51
Command Reference
tracert
Use the
tracert
command to trace the gateways the test packets passes through during its journey from
the source to the destination.
Any view
traffic behavior
Use the
traffic behavior
command you can define a traffic behavior and enter the behavior view.
System view
traffic classifier
Use the
traffic classifier
command to define a class and enter the class view.
System view
ttl
Use the
ttl
command to configure the maximum number of hops a test request packet traverses in the
network.
NQA Test Group view
udp-helper enable
Use the
udp-helper enable
command to enable the UDP Helper, allowing the device to convert a UDP
broadcast packet into a unicast packet and send it to the specified server.
System view
udp-helper port
Use the
udp-helper port
command to specify the port whose UDP packets are to be forwarded.
System view
udp-helper server
Use the
udp-helper server
command to specify the destination server for the UDP packets to be
forwarded.
Interface view
undelete
Use the
undelete
command to restore a file from the recycle bin.
User view
unicast-suppression
Use the
unicast-suppression
command to configure unicast storm suppression ratio.
Ethernet Interface view
Port Group view
user
Use the
user
command to log onto the FTP server as a particular user.
FTP Client view
user-interface
Using
user-interface
command to enter one or more user interface views to perform configuration.
System view
username
Use the
username
command to configure a name used for logging onto the FTP server.
NQA Test Group view
user-name-format
Use the
user-name-format
command to set the format of the user names to be sent to RADIUS server.
RADIUS Scheme view
user-name-format
Use the
user-name-format
command to configure the username format sent to the TACACS server.
Scheme view
user privilege level
Use the
user privilege level level
command to configure the command level that a user can access
from the specified user interface.
User Interface view
validate source address
Use the
validate-source-address
command to enable the source address validation for received RIP
updating routes.
RIP view
verbose
Use the
verbose
command to enable the verbose function, which displays execution and response
information of other related commands.
FTP Client view