3Com 4500G 3CR17761-91, Quick Reference Manual

Page: 38 / 52

38 3Com Switch 4500G Family
Command Reference
qos wrr
Use the
qos wrr weight
command to configure the WRR queue or modify the parameters of the WRR
queue on the port.
Gigabit Ethernet Port view
quit
Use the
quit
command to return from current view to lower level view, or exit the system if current view is
user view.
Any view
quit
Use the
quit
command to terminate the connection to the remote FTP server.
FTP client view
quit
Use the
quit
command to terminate the connection to the remote SFTP server and return to system view..
User view
radius nas-ip
Use the
radius nas-ip
command to set the source IP address used by the switch to send RADIUS packets.
System view
radius scheme
Use the
radius scheme
command to create a RADIUS scheme and enter its view.
System view
reboot
Use the
reboot
command to reset the entire system.
User view
reboot member
Use the
reboot member
command to reboot a specified member device on the management device.
Cluster view
redirect
Use the
redirect
command to configure the traffic redirect action for the traffic behavior.
Traffic Behavior view
region-name
Use the
region-name
command to set an MST region name to a switch.
MST Region view
remark dot1p
Use the
remark dot1p
command to configure the 802.1p priority value in the VLAN packets of a class.
Traffic Behavior view
remark dsc
Use the
remark dscp
command to configure the DSCP value of a packet.
Traffic Behavior view
remark ip-precedence
Use the
remark ip-precedence
command to configure the IP priority of a packet.
Traffic Behavior view
remark local-precedence
Use the
remark local-precedenc
e command to configure the local precedence of a packet.
Traffic Behavior view
remotehelp
Use the
remotehelp
command to display help information about the FTP protocol command.
FTP Client view
rmdir
Use the
rmdir
command to delete a specified directory from a remote SFTP server.
SFTP Client view
remove
Use the
remove
command to delete the specified file from a remote server.
SFTP Client view
rename
Use the
rename
command to rename a file or a directory.
User view