3Com Switch 4500G Family
29
Command Reference
jumboframe enable
Use the
jumboframe enable
command to allow jumbo frames that are not larger than 9216 bytes to pass
through the current Ethernet port.
Ethernet Interface view
Port Group view
key
Use the
key
command to set a shared key for the RADIUS authentication/authorization packets or
accounting packets.
RADIUS Scheme view
key
Use the
key
command to configure a shared key for authentication, authorization or accounting.
Scheme view
lacp port-priority
Use the
lacp port priority
command to assign an LACP priority to the port or ports in the port group.
Ethernet Interface view
Port-Group view
lacp system-priority
Use the
lacp system-priority
command to assign an LACP priority to the local system.
System view
language-mode
Use the
language-mode
command to toggle between the language modes (that is, language environments)
of the command line interface (CLI) to meet your requirement.
User view
last-member-query-interval
Use the
last-member-query-interval
command to configure the global interval of sending IGMP
last-member queries.
IGMP Snooping view
lcd
Use the
lcd
command to display the local work directory on the FTP client.
FTP Client view
ldap-server
Use the
ldap-server ip
command to configure the LDAP server IP address and the port.
PKI Domain view
level
Use the
level
command to set the priority level of the user.
Local User view
link-aggregation group description
Use the
link-aggregation group description
command to configure a name or a description for the
specified link aggregation group.
System view
link-aggregation group mode
Use the
link-aggregation group mode
command to create a manual or static LACP link aggregation
group.
System view
local-proxy-arp enable
Use the
local-proxy-arp enable
command to enable local proxy ARP.
VLAN Interface view
local-server
Use the
local-server
command to create a local RADIUS authentication server (that is, set the related
parameters of the server).
System view
local-user
Use the
local-user
command to add a local user and enter local user view.
System view
local-user password-display mode
Use the
local-user password-display-mode
command to set the password display mode of all users.
System view
