3Com Switch 4500G Family
27
Command Reference
info-center monitor channel
Use the
info-center monitor channel
command to configure the channel to output system information
to the monitor.
System view
info-center snmp channel
Use the
info-center snmp channel
command to configure the channel to output system information to
the SNMP NMS.
System view
info-center source
Use the
info-center source
command to specify the information source for a specified channel.
System view
info-center synchronous
Use the
info-center synchronous
command to enable synchronous terminal output.
System view
info-center timestamp loghost
Use the
info-center timestamp loghost
command to configure whether to include the year information
in the output log information to the log host.
System view
info-center timestamp
Use the
info-center timestamp
command to configure the time stamp format.
System view
info-center trapbuffer
Use the
info-center trapbuffer
command to enable information output to the trap buffer.
System view
instance
Use the
instance
command to map specified VLANs to a specified spanning tree instance.
MST Region view
interface VLAN-interface
Use the
interface Vlan-interface
command to create a VLAN interface or enter VLAN interface view.
System view
interface
Use the command
interface
command to enter the related interface view.
System view
ip
Use the
ip
command to specify the IP address of an entity.
PKI Entity view
ip address
Use the
ip address
command to specify the IP address and subnet mask for a VLAN interface.
VLAN Interface view
ip address
Use the
ip address
command to assign an IP address (and mask) to a management VLAN interface.
Interface view
ip address bootp-alloc
Use the
ip address bootp-alloc
command to enable an interface to obtain IP address through BOOTP
protocol.
Interface view
ip address dhcp-alloc
Use the
ip address dhcp-alloc
command to configure an interface to use DHCP for IP address
acquisition.
Interface view
ip forward-broadcast
Use the
ip forward-broadcast
command to enable the device to receive directed broadcast packets.
System view
ip forward-broadcast [acl-number]
Use the
ip forward-broadcast
[
acl-number
] command in interface view to enable an interface to
forward directed broadcast packets.
VLAN Interface view
Loopback Interface view
