3Com 4500G 3CR17761-91, Quick Reference Manual

Page: 31 / 52

3Com Switch 4500G Family 31
Command Reference
mac-authentication timer
Use the
mac-authentication timer
command to set the MAC authentication timers.
System view
management-vlan
Use the
management-vlan
command to specify the management VLAN on the switch.
Cluster view
max-response-time
Use the
max-response-time
command to configure the global value of the maximum response time to
IGMP general queries.
IGMP Snooping view
mdi
Use the
mdi
command to configure the cable type for an Ethernet interface.
Ethernet Interface view
mirror-to interface
Use the
mirror-to interface
command to configure the action of mirroring traffic to a specified port.
Traffic Behavior view
mirroring group
Use the
mirroring-group
command to create the port mirroring group.
System view
mirroring-group mirroring-port
Use the
mirroring-group mirroring-port
command to add a source port to a mirroring group already
created.
System view
mirroring-group monitor-port
Use the
mirroring-group monitor-port
command to add a destination port to a mirroring group already
created.
System view
mirroring-port
Use the
mirroring-port
command to configure the present port as a mirroring port under interface view.
Interface view
mkdir
Use the
mkdir
command to create a directory in a specified directory of a specified storage device.
User view
mkdir
Use the
mkdir
command to create a directory on the remote FTP server.
FTP Client view
mkdir
Use the
mkdir
command to create a directory on the remote SFTP server.
SFTP Client view
more
Use the
more
command to display the content of a specified file.
User view
move
Use the
move
command to move a file to a specified directory. You can also assign a new name for the file.
User view
multicast-suppression
Use the
multicast-suppression
command to configure multicast storm suppression ratio.
Ethernet Interface view
Port Group view
multicast-vlan enable
Use the
multicast-vlan enable
command to configure the VLAN as a multicast VLAN.
System view
multicast-vlan subvlan
Use the
multicast-vlan subvlan
command to configure a group of VLANs as the sub-VLANs of a
multicast VLAN.
System view
nas-ip
Use the
nas-ip
command to set the source IP address used by the switch to send RADIUS packets.
RADIUS Scheme view