24
3Com Switch 4500G Family
Command Reference
help
Use the
help
command to display the help information of SFTP client commands.
SFTP Client view
history-command max-size
Use the
history-command max-size
command to set the size of history command buffer.
User Interface view
history-records
Use the
history-records
command to configure the maximum number of history records that can be
saved in a test group.
NQA Test Group view
holdtime
Use the
holdtime
command to configure the holdtime of a switch.
Cluster view
Use the
holdtime
command to configure the holdtime of a switch.
host-aging-time
Use the
host-aging-time
command to configure the global aging time of group member ports.
IGMP Snooping view
host-route
Use the
host-route
command to enable the router to receive host routes.
RIP view
hotkey
Use the
hotkey
command to assign a hot key to a command line.
System view
http-operation
Use the
http-operation
command to configure an HTTP operation type.
NQA Test Group view
http-string
Use the
http-string
command to configure an HTTP operation string. The HTTP operation string
specifies the accessed web page and the HTTP version used.
NQA Test Group view
hwtacacs nas-ip
Use the
hwtacacs nas-ip
command to specify the source address of the packet sent from NAS.
System view
hwtacacs scheme
Use the
hwtacacs scheme
command to create an scheme and enter its view.
System view
idle-cut
Use the
idle-cut
command to set the user idle-cut function in current ISP domain.
ISP Domain view
idle-timeout
Use the
idle-timeout
command to configure the amount of time you want to allow a user interface to
remain idle before it is disconnected.
User Interface view
if-match
Use the
if-match
command to define a rule for all the packets matching the specified rule.
Class view
if-match { acl | ip-prefix }
Use the
if-match
{ acl | ip-prefix } command to match destination IP addresses of routes against the
specified ACL or the IP prefix list.
Routing Policy view
if-match cost
Use the
if-match cost
command to configure one of the matching rules of route-policy to match the cost
of the routing information.
Routing Policy view
if-match cost
if-match interface
Use the
if-match interface
command to match outbound interfaces of routing information to specified
interfaces.
Routing Policy view
