44
3Com Switch 4500G Family
Command Reference
session
Use the
session
command to configure the maximum number of sessions that can be buffered and the
session timeout time.
SSL Server Policy view
set authentication password
Use the
set authentication password
command to set the local password.
User Interface view
sftp
Use the
sftp
command to initiate a connection to the remote SFTP server and enter SFTP client view.
System view
sftp client source
Use the
sftp client source
command to specify the source IP address or interface of the SFTP client.
System view
sftp server enable
Use the
sftp server enable
command to enable the secure FTP (SFTP) server.
System view
sftp server idle time-out
Use the
sftp server idle-timeout
command to set the idle timeout period for SFTP user connections.
System view
shell
Use the
shell
command to make terminal services available for the user interface.
User Interface view
shutdown
Use the
shutdown
command to disable the VLAN interface.
VLAN Interface view
shutdown
Use the
shutdown
command to shut down an Ethernet interface.
Ethernet Interface view
silent-interface
Use the
silent-interface
command to disable an interface from sending RIP route update messages.
RIP view
snmp-agent
Use the
snmp-agent
command to enable SNMP Agent.
System view
snmp-agent community
Use the
snmp-agent community
command to set a community name and to enable users to access the
switch through SNMP. You can also optionally use this command to apply an ACL to filter network
management users.
System view
snmp-agent community
Use the
snmp-agent community
command to configure a new SNMP community.
System view
snmp-agent group
Use the
snmp-agent group
command to configure a SNMP group. You can also optionally use this
command to apply an ACL to filter network management users.
System view
snmp-agent group
Use the
snmp-agent group
command to configure a new SNMP group and specify its access right.
System view
snmp-agent local-engineid
Use the
snmp-agent local-engineid
command to configure a local engine ID for an SNMP entity.
System view
snmp-agent mib-view
Use the
snmp-agent mib-view
command to create or update MIB view information so that MIB objects can
be specified.
System view
