22
C
HAPTER
5: C
ONNECTING
THE
PC C
ARD
AND
U
SING
THE
U
TILITIES
Type II PC Card
When using the XJACK connector, the card LED displays the status of your
network link as follows:
When using the network adapter cable, the green LEDs display the status of your
network link as follows:
■
Steady indicates a good connection between the card and the hub.
■
Blinking indicates either a faulty connection, or if the speed was set manually,
the connection was not made at that speed.
■
Off indicates that there is no connection between the card and the network.
NOTE:
You can use the LEDs to verify link integrity only when the LAN card is
connected to the network and the network drivers are installed.