6
I
NTELLIGENT
A
UTO
I
NSTALL
FOR
W
INDOWS
AND
DOS E
NVIRONMENTS
If only one PC Card has been installed, you can use the 3Com Intelligent Auto
Install software program to automatically install the NetWare ODI client software
(including the driver), and to modify the CONFIG.SYS and AUTOEXEC.BAT files.
To use the Intelligent Auto Install program, the PC must meet these requirements:
■
Use Novell NetWare 3.12, 4.10, or 4.11 network operating system
■
Have
only one
PC Card installed
■
Be intended for use as a NetWare DOS ODI client
To use the Intelligent Auto Install program, follow these steps:
1
Make sure the LAN card is installed and connected to the network, as described in
Chapter 5.
2
Boot the PC under DOS.
3
With the
Installation Disk
in your CD-ROM drive, type
d:\install
(where d: is your
CD-ROM drive) at the DOS prompt, and press Enter.
4
Select
Intelligent Auto Install and Config for NetWare (Intelligent Auto Install)
.
When the OS selection screen appears, press Enter.
5
Select
Intelligent Auto Install for DOS, Windows 3.x, or WFW 3.11
.
Several messages appear while the Intelligent Auto Install program is running. A
final message indicates successful installation.
If problems occur only when the Intelligent Auto Install program runs, view or
print the COMSLINK.LOG file (located in your root directory).
6
As installation concludes, you are asked if you want to reboot the PC. For the
installation to be effective, remove the
Installation
disk and reboot the notebook.
When prompted, type your user name and password.
