2N Helios IP, Configuration Manual

Page: 124 / 177

2N TELEKOMUNIKACE a.s., www.2n.cz 124/177
1. a.
b.
c.
d.
For full ONVIF functionality it is required to set at least one user account and set
proper access right, according to ONVIF specification and used VMS. Without this,
only basic functionality is available.
Enabled – Enables or disables the user account.
Name – set the user name for access to ONVIF.
Password – set the password for access to ONVIF.
Access level – e Sets the level of user rights for the ONVIF servic
(Anonymous, User, Operator, Administrator)
Output type - set the inverted logic input control mode via ONVIF.
Note
Check the following RTSP and JPEG functions for enable to make the
ONVIF function work properly (to gain full compatibility with the third
party equipment):
on the RTSP tab RTSP Server enabled
RTSP tab Video stream enabled on the
o RTSP tab UDP unicast enabled n the
o JPEG tab Snapshot download enabled n the
Note
Preset authorisation for ONVIF
Username: admin
Password: 2n