2N TELEKOMUNIKACE a.s., www.2n.cz
84/177
Card read signalling – set one of the card reading signalling modes:
-
Full
acoustic signals distinguish valid/invalid cards,
- one beep signals
Single Beep
both valid and invalid cards,
- acoustic signalling is disabled.
None
Direction – set the passage direction for the card reader (Not Specified, In, Out)
for the attendance system purposes.
Allowed card types – select one or more card types to be accepted. If no
selection is made, all types of supported cards are accepted.
Interface mode – enable the Wiegand function and set Wiegand IN/OUT. The IDs
of the cards tapped on the internal card reader are always resent to Wiegand
OUT.
Received code format – select one or more message formats to be received via
the Wiegand interface. If no selection is made, all supported message formats
are accepted.
Transmitted code format – set the sent message format: 26-bit, 32-bit, 37-bit or
RAW.
26-bit message format (HID26)
Bits are sent to the Wiegand interface from the left to the right
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
E
F
F
F
F
F
F
F
F
C
C
C
C
C
C
C
C
C
C
C
C
C
Summary of Contents for Helios IP
Page 1: ...www 2n cz 2N Helios IP IP Intercom Configuration Manual Version 2 17 ...
Page 22: ...2N TELEKOMUNIKACE a s www 2n cz 22 177 5 Intercom Configuration ...
Page 82: ...2N TELEKOMUNIKACE a s www 2n cz 82 177 ...
Page 97: ...2N TELEKOMUNIKACE a s www 2n cz 97 177 Display Module Configuration ...
