2N TELEKOMUNIKACE a.s., www.2n.cz
150/177
5.5.1 Network
As the
intercom is connected to the LAN, make sure that its IP address
2N Helios IP
has been set correctly or obtained from the LAN DHCP server. Configure the IP
address and DHCP in the
subsection.
Network
Tip
To know the current IP address of your intercom, use the 2N Helios IP
®
, which can be freely downloaded from
, or apply the
Scanner
www.2n.cz
steps described in the Installation Manual of the respective intercom: the
intercom communicates its IP address to you via a voice function.
If you use the RADIUS server and 802.1x-based verification of connected equipment,
you can make the intercom use the EAP-MD5 or EAP-TLS authentication. Set this
function in the
tab.
802.1x
The
tab helps you launch capture of incoming and outgoing packets on the
Trace
intercom network interface. The file with captured packets can be downloaded for
Wireshark processing, e.g. (
).
www.wireshark.org
List of Parameters
Network
Use DHCP server – enable automatic obtaining of the IP address from the LAN
Summary of Contents for Helios IP
Page 1: ...www 2n cz 2N Helios IP IP Intercom Configuration Manual Version 2 17 ...
Page 22: ...2N TELEKOMUNIKACE a s www 2n cz 22 177 5 Intercom Configuration ...
Page 82: ...2N TELEKOMUNIKACE a s www 2n cz 82 177 ...
Page 97: ...2N TELEKOMUNIKACE a s www 2n cz 97 177 Display Module Configuration ...
