manualshive.com logo in svg

2N Helios IP, Configuration Manual

Share
Download
2N Helios IP Configuration Manual Download Page 112

2N TELEKOMUNIKACE a.s., www.2n.cz

112/177

5.4.2 Streaming

The

 intercoms provide several audio/video streaming methods; refer to 

 2N Helios IP

the table below:

Transmission 

method

Description

JPEG/HTTP

Static JPEG image transmission. Refer to the JPEG tab below.

MJPEG

/HTTP

A series of consecutive JPEG images, the Server Push - multipart/x-mixed-

replace method. Refer to the JPEG tab below.

RTSP + RTP

/UDP

RTSP with separate RTP/UDP audio and video streams. Supported both for audio 

(G.711) and video (H.264, H.263, MPEG-2 and MJPEG). Refer to the RTSP tab 

below.

RTP/RTSP

RTP tunnelling via RTSP. Supported both for audio (G.711) and video (H.264, H.

263, MPEG-2 and MJPEG). Refer to the RTSP tab below.

RTP/RTSP

/HTTP

RTSP tunnelling via HTTP. Supported both for audio (G.711) and video (H.264, H.

263, MPEG-2 and MJPEG). Refer to the RTSP tab below.

RTP/UDP-

Multicast

Uncontrolled RTP packet multicast. Supported for audio (G.711) only. Refer to the 

Multicast tab below.

Summary of Contents for Helios IP


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands