2N TELEKOMUNIKACE a.s., www.2n.cz
32/177
in predefined time intervals or at the same time (group calls). You can assign a
time profile and the address of the PC on which the
2N
®
Helios IP Eye
application is running to display the intercom camera image before call
answering, for example.
– no user number can be entered via the numeric keypad.
Disabled
– enter the user virtual number via the numeric keypad
User virtual number
and press * to start the call.
– enter the user position (01 – 1999) via the numeric
User position number
keypad and press * to start the call. This original FW 2.10 option is no more
recommended due to potential user management troubles.
– enter the switch activating user codes (door lock activation,
User switch codes
e.g.). A time profile can be assigned to each code.
– enter the user-defined access cards with/without a time profile.
User cards
Enable/disable double authentication (valid user card + switch activating code)
for each user.
– enter the user-defined codes to activate
User activation and deactivation codes
/deactivate speed dial and virtual number calling. Calls to a deactivated user are
automatically forwarded to the User deputy.
Refer to the
menu for the Users settings. Use the navigation panel
Directory / Users
for selecting the user positions easily and arrows for scrolling pages. Or, you can enter
the position number and push
to move to the position quickly. If you know the
user's name, push
to find its position.
Summary of Contents for Helios IP
Page 1: ...www 2n cz 2N Helios IP IP Intercom Configuration Manual Version 2 17 ...
Page 22: ...2N TELEKOMUNIKACE a s www 2n cz 22 177 5 Intercom Configuration ...
Page 82: ...2N TELEKOMUNIKACE a s www 2n cz 82 177 ...
Page 97: ...2N TELEKOMUNIKACE a s www 2n cz 97 177 Display Module Configuration ...
