2N Helios IP, Configuration Manual

Page: 35 / 177

2N TELEKOMUNIKACE a.s., www.2n.cz 35/177
Helios IP Eye address – set the address of the PC to be sent a special UDP
message on each active user phone number call. With the aid of this message,
the application displays the camera image screen for those 2N Helios IP Eye
®
users who are not provided with a display-equipped videophone. Enter the
address as follows: domain[:
][: ], e.g.: or port1 port2 computer.yourcompany.com
192.168.22.111. The and parameters are optional and are used in case port1 port2
there is Network Address Translation (NAT) between the PC and intercom and
the addresses have to comply with the router or another NAT-executing device.
The port1 (default value: 8003) parameter defines the destination port for the
UDP messages sent to . The port2 (default value: 80) 2N Helios IP Eye
®
parameter defines the destination port for the – intercom 2N Helios IP Eye
®
HTTP communication.
Note
The 'Helios IP Eye Address' function is available in selected 2N Helios IP
models only (refer to the model and licence overview).
When Enhanced Integration is not licensed on a device, it is possible to
control the locks only when a call is in progress. If a call with user, who
has address filled in, is in progress, no licence is 2N Helios IP Eye
®
needed to control the locks.
Tip
FAQ: 2N Helios IP Eye - How to set
®
Tip
Video Tutorial: SW application for IP intercoms - 2N Helios IP Eye
®
Parallel call to following number – enable group calling, i.e. calling to more phone
numbers at the same time. You can call the first two numbers, the last two
numbers, or all of the three user numbers in parallel. Answering one call
automatically terminates the other calls.
Parallel call to following deputy – extend group calling to include the User
deputy.
User deputy – select a user to which the user calls will be routed in the event of