2N TELEKOMUNIKACE a.s., www.2n.cz
151/177
Use DHCP server – enable automatic obtaining of the IP address from the LAN
DHCP server. If the DHCP server is unavailable or inaccessible in your LAN, use
the manual network settings.
Static IP address – static IP address of the intercom, which is used together with
the below mentioned parameters if the
parameter is disabled.
Use DHCP Server
Network mask – network mask.
Default gateway – address of the default gateway, which provides
communication with off-LAN equipment.
Primary DNS – primary DNS server address for translation of domain names to IP
addresses.
Secondary DNS – secondary DNS server address, which is used in case the
primary DNS is inaccessible.
VLAN enabled – enable the virtual network (VLAN) support (according to
recommendation 802.1q). Set the virtual network ID too to make the function
work properly.
– select a virtual network ID in the range of 1-4094. The device shall
VLAN ID
receive only the packets tagged with this ID. A wrong setting may result in a
connection loss and need to reset the device to factory values.
Summary of Contents for Helios IP
Page 1: ...www 2n cz 2N Helios IP IP Intercom Configuration Manual Version 2 17 ...
Page 22: ...2N TELEKOMUNIKACE a s www 2n cz 22 177 5 Intercom Configuration ...
Page 82: ...2N TELEKOMUNIKACE a s www 2n cz 82 177 ...
Page 97: ...2N TELEKOMUNIKACE a s www 2n cz 97 177 Display Module Configuration ...
