2N TELEKOMUNIKACE a.s., www.2n.cz
94/177
Direction – set the reader direction (Not specified, Arrival, Departure) for the
Attendance system purposes.
Multiple authentication – enable multiple user authentication via this module (or,
authentication is controlled by the user card settings; refer to Directory / Users).
Multiple authentication can be disabled for each reader connected to the
intercom.
Associated switch – set the number of the switch to be activated after user
authentication via this module.
Sound signalling – set one of the sound signalling modes for the module:
Full valid and invalid accesses are distinguished by sound signalling
–
Single beep valid and invalid accesses are signalled by a single beep
–
None module use is not signalled by any sound
–
Signal range – set the maximum signal range, i.e. the distance within which the
Bluetooth module can communicate with the mobile phone:
Short – less than 50 cm for most phones
Middle – less than 2 m for most phones
Long – maximum possible range
Operation mode – set the authentication method for a mobile phone:
Tap in app – authentication has to be confirmed by tapping on an icon in
the application running in a mobile phone
Touch mode – authentication has to be confirmed by moving the hand to
the Bluetooth module installed
Proximity mode – authentication is executed automatically when the
mobile phone is within the Bluetooth module signal reach
I/O Module Configuration
Summary of Contents for Helios IP
Page 1: ...www 2n cz 2N Helios IP IP Intercom Configuration Manual Version 2 17 ...
Page 22: ...2N TELEKOMUNIKACE a s www 2n cz 22 177 5 Intercom Configuration ...
Page 82: ...2N TELEKOMUNIKACE a s www 2n cz 82 177 ...
Page 97: ...2N TELEKOMUNIKACE a s www 2n cz 97 177 Display Module Configuration ...
