Chapter 8 Home Networking
XMG3512-B10A User’s Guide
115
The following table describes the fields in this screen.
Table 29 Network Setting > Home Networking > LAN Setup
LABEL
DESCRIPTION
Interface Group
Group Name
Select the interface group name for which you want to configure LAN settings. See
for how to create a new interface group.
LAN IP Setup
IP Address
Enter the LAN IPv4 address you want to assign to your XMG in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your XMG automatically computes the subnet mask based on the IP Address
you enter, so do not change this field unless you are instructed to do so.
IGMP Snooping
Active
Select
Enable
to allows the XMG to passively learn multicast group.
IGMP
Select
Standard Mode
to allow the XMG to forward traffic only to ports that want to receive it.
Select
Blocking Mode
to allow the XMG to block unknown muticast adresses.
DHCP Server State
DHCP
Select
Enable
to have the XMG act as a DHCP server or DHCP relay agent.
Select
Disable
to stop the DHCP server on the XMG.
Select
DHCP Relay
to have the XMG forward DHCP request to the DHCP server.
DHCP Relay
Server Address
This field is only available when you select
DHCP Relay
in the
DHCP
field.
IP Address
Enter the IPv4 address of the actual remote DHCP server in this field.
IP Addressing
Values
This field is only available when you select
Enable
in the
DHCP
field.
Beginning IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Ending IP
Address
This field specifies the last of the contiguous addresses in the IP address pool.
Auto reserve IP
for the same
host
Select
Enable
to have the XMG record DHCP IP addresses with the MAC addresses the IP
addresses are assigned to. The XMG assigns the same IP address to the same MAC address
when the host requests an IP address again through DHCP.
DHCP Server
Lease Time
This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are “recycled” and made available for future reassignment to
other systems.
This field is only available when you select
Enable
in the
DHCP
field.
Days/Hours/
Minutes
Enter the lease time of the DHCP server.
DNS Values
This field is only available when you select
Enable
in the
DHCP
field.
DNS
Select
From ISP
if your ISP dynamically assigns DNS server information.
Select
DNS Proxy
if you have the DNS proxy service. The XMG redirects clients’ DNS queries to a
DNS server for resolving domain names.
Select
Static
if you have the IP address of a DNS server.
DNS Server 1/2
This field is only available when you select
Static
in the
DNS
field. Enter the first and second DNS
(Domain Name System) server IP addresses the XMG passes to the DHCP clients.
Содержание XMG3512-B10A
