manualshive.com logo in svg

ZyXEL Communications USG110, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications USG110 Скачать руководство пользователя страница 184

Chapter 6 Dashboard

ZyWALL USG Series User’s Guide

184

6.2.1  Device Information Screen

The Device Information screen displays Zyxel Device’s system and model name, serial number, MAC 
address and firmware version shown in the below screen.

Figure 154   

Dashboard > Device Information (Example)

Name

This field displays the name of each interface. 

Status

This field displays the current status of each interface or device installed in a slot. The possible 
values depend on what type of interface it is.

Inactive

 - The Ethernet interface is disabled.

Down

 - The Ethernet interface does not have any physical ports associated with it or the 

Ethernet interface is enabled but not connected.

Speed / Duplex

 - The Ethernet interface is enabled and connected. This field displays the port 

speed and duplex setting (

Full

 or 

Half

).

The status for a WLAN card is 

none

.

For cellular (mobile broadband) interfaces, see 

Section 10.7 on page 338

 for the status that 

can appear.

For the auxiliary interface:

Inactive

 - The auxiliary interface is disabled.

Connected

 - The auxiliary interface is enabled and connected. 

Disconnected

 - The auxiliary interface is not connected. 

HA Status

This field displays the status of the interface in the virtual router.

Active

 - This interface is the master interface in the virtual router.

Stand-By

 - This interface is a backup interface in the virtual router.

Fault

 - This VRRP group is not functioning in the virtual router right now. For example, this might 

happen if the interface is down. 

n/a

 - Device HA is not active on the interface.

Zone

This field displays the zone to which the interface is currently assigned.

IP Address/

Mask

This field displays the current IP address and subnet mask assigned to the interface. If the 
interface is a member of an active virtual router, this field displays the IP address it is currently 
using. This is either the static IP address of the interface (if it is the master) or the management 
IP address (if it is a backup).

Table 22   Dashboard (continued)

LABEL

DESCRIPTION

Содержание USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды