Prestige 650HW ADSL Router
NAT 7-7
Step 1.
Enter 11 from the main menu.
Step 2.
Move the cursor to the
Edit IP/IPX/Bridge
field, press
[SPACE BAR]
to select
Yes
and then
press
[ENTER]
to bring up
Menu 11.3 - Remote Node Network Layer Options.
Figure 7-4 Menu 11.3 — Applying NAT to the Remote Node
The following table describes the options for Network Address Translation.
Table 7-3 Applying NAT in Menus 4 & 11.3
FIELD DESCRIPTION EXAMPLE
Press [SPACE BAR] and then [ENTER] to select
Full Feature
if you
have multiple public WAN IP addresses for your Prestige. The SMT
uses the address mapping set that you configure and enter in the
Address Mapping Set
field (menu 15.1 - see section
7.3.1
).
Full Feature
Select
None
to disable NAT.
None
NAT
When you select
SUA Only
, the SMT uses Address Mapping Set 255
(menu 15.1 - see section
7.3.1
). Choose
SUA Only
if you have just
one public WAN IP address for your Prestige.
SUA Only
Menu 11.1 - Remote Node Profile
Rem Node Name= test Route= IP+IPX
Active= Yes Bridge= Yes
Encapsulation= PPP Edit PPP Options= No
Multiplexing= LLC-based Rem IP Addr= 0.0.0.0
Incoming: Edit IP/IPX/Bridge= Yes
Rem Login=
Rem Password= ********
Outgoing: Session Options:
My Login= Edit Filter Sets= No
My Password= ******** PPPoE Idle Timeout(sec)= N/A
Authen= CHAP/PAP PPPoE Service Name= N/A
Schedule Sets= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.