Prestige 650HW ADSL Router
13-4
IP Policy Routing
Type a number from 1 to 6 to display
Menu 25.1.1 – IP Routing Policy
(see the next figure).
This menu
allows you to configure a policy rule.
Figure 13-3 IP Routing Policy
Table 13-2 IP Routing Policy
FIELD DESCRIPTION
Policy Set Name
This is the policy set name assigned in
Menu 25 – IP Routing Policy Setup
.
Active
Press [SPACE BAR] and then [ENTER] to select
Yes
to activate or No to
deactivate the policy. Inactive policies are displayed with a minus sign “-“ in
SMT menu 25.
Criteria
IP Protocol
IP layer 4 protocol, for example,
UDP
,
TCP
,
ICMP
, etc.
Type of Service
Prioritize incoming network traffic by choosing from
Don’t Care
,
Normal
,
Min
Delay
,
Max Thruput, Min Cost
or
Max Reliable
.
Precedence
Precedence value of the incoming packet. Press [SPACE BAR] and then
[ENTER] to select a value from
0
to
7
or
Don’t Care
.
Packet Length
Type the length of incoming packets (in bytes). The operators in the
Len
Comp
(next field) apply to packets of this length.
Len Comp
Press [SPACE BAR] and then [ENTER] to choose from
Equal
,
Not Equal
,
L
G
t
L
E
l
G
t
E
l
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal
Packet length= 40
Precedence = 0
Len Comp= N/A
Source:
addr start= 1.1.1.1
end= 1.1.1.1
port start= 20
end= 20
Destination:
addr start= 2.2.2.2
end= 2.2.2.2
port start= 20
end= 20
Action= Matched
Gateway addr = 192.168.1.1
Log= No
Type of Service= Max Thruput
Precedence = 0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.