Prestige 650HW ADSL Router
Remote Node Configuration
4-5
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION
EXAMPLE
Incoming:
Rem Login
Type the login name that this remote node will use to
call your Prestige. The login name and the
Rem
Password
will be used to authenticate this node.
Rem Password Type the password used when this remote node calls
your Prestige.
Outgoing:
My Login
Type the login name assigned by your ISP when the
Prestige calls this remote node.
My Password Type the password assigned by your ISP when the
Prestige calls this remote node.
This field sets the authentication protocol used for
outgoing calls. Options for this field are:
CHAP
/
PAP
– Your Prestige will accept either
CHAP
or
PAP
when requested by this remote node.
CHAP
– accept
CHAP
(Challenge Handshake
Authentication Protocol) only.
Authen
PAP
– accept PAP (Password Authentication Protocol)
only.
PAP
Route
This field determines the protocol used in routing.
Options are
IP
and
None.
IP
Bridge
When bridging is enabled, your Prestige will forward any
packet that it does not route to this remote node;
otherwise, the packets are discarded. Select
Yes
to
enable and
No
to disable.
No
Edit IP/Bridge
Press [SPACE BAR] to select
Yes
and press [ENTER]
to display
Menu 11.3 – Remote Node Network Layer
Options
.
No
Edit ATM Options
Press [SPACE BAR] to select
Yes
and press [ENTER]
to display
Menu 11.6 – Remote Node ATM Layer
Options
.
No
Telco Option
Allocated Budget (min)
This sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 meaning no budget
control.
0
(default)
Period (hr) This field is the time period that the budget should be
reset. For example, if we are allowed to call this remote
0
(default)