Prestige 650HW ADSL Router
8-10
Filter Configuration
Figure 8-10 Menu 21.1.1
—
TCP/IP Filter Rule
The following table describes how to configure your TCP/IP filter rule.
Table 8-3 TCP/IP Filter Rule Menu Fields
FIELD DESCRIPTION
EXAMPLE
Filter #
This is the filter set, filter rule coordinates, for instance, 2,
3 refers to the second filter set and the third filter rule of
that set.
1,1
Filter Type
Use [SPACE BAR] and then [ENTER] to choose a rule.
Parameters displayed for each type will be different.
Choices are
TCP/IP Filter Rule
or
Generic Filter Rule
.
TCP/IP Filter Rule
Active
Select
Yes
to activate
or
No
to deactivate the filter rule.
No
(default)
IP Protocol
This is the upper layer protocol, for example, TCP is 6,
UDP is 17 and ICMP is 1. The value must be between 0
and 255. A value of O matches ANY protocol.
0 to 255
IP Source Route
IP Source Route is an optional header that dictates the
route an IP packet takes from its source to its destination.
If
Yes
, the rule applies to any packet with an IP source
route. The majority of IP packets do not have source
route.
No
(default)
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6 IP Source Route= No
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
TCP Estab= No
More= No Log= None
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.