manualshive.com logo in svg

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 85 / 314

Поделиться
Скачать
ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 85

 Chapter 7 Basic Setting 

OLT-1308 Series User’s Guide

85

7.8  IGMP Snooping 

The OLT can passively snoop on IGMP Query, Report and Leave (IGMP version 2) packets 
transferred between IP multicast routers/switches and IP multicast hosts to learn IP multicast 
group membership information. It checks IGMP packets passing through it, picks out the 
group registration information, and configures multicasting accordingly. IGMP snooping 
allows the OLT to learn multicast groups without you having to manually configure them.
The OLT forwards multicast traffic destined for multicast groups (that it has learned from 
IGMP snooping or that you have manually configured) to ports that are members of that 
group. The OLT discards multicast traffic destined for multicast groups that it does not know. 
IGMP snooping generates no additional network traffic, allowing you to significantly reduce 
multicast traffic passing through your OLT.

7.9  DBA (Dynamic Bandwidth Allocation) 

When network congestion occurs, dynamic bandwidth allocation allows the OLT to quickly 
re-assign unused bandwidth based on traffic requirements. Bandwidth re-assignment can be 
for an ONU or for the priority-level queues. In addition to reassigning bandwidth on the go, 
DBA helps to ensure quality of service on the network. 
By default, the OLT uses the Plato DBA algorithm that allows you to fully utilize bandwidth in 
your network environment. With Plato DBA algorithm, the OLT assigns bandwidth based on 
link priority and delay tolerance. In addition, the OLT guarantees a minimum upstream 
bandwidth and provides the best-effort maximum upstream bandwidth.  

7.10  EPON Setup  

Use the 

EPON Setup

 screen to configure general PON (or fiber) interface settings. Click 

Basic Setting > EPON Setup

. Not all fields are available on all models.

Apply

Click 

Apply

 to save the settings. 

Cancel

Click 

Cancel

 to reset the fields to your previous configuration.

Table 18   

Port Setup: OLT-1308H  (continued)

LABEL

DESCRIPTION

Содержание OLT-1308



























































































































































































































































































































Отзывы:

Нет отзывов