manualshive.com logo in svg

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 203 / 314

Поделиться
Скачать
ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 203

 Chapter 30 Access Control

OLT-1308 Series User’s Guide

203

SNMP itself is a simple request/response protocol based on the manager/agent model. The 
manager issues a request and the agent returns responses using the following protocol 
operations: 

30.3.1  Supported MIBs 

MIBs let administrators collect statistics and monitor status and performance.
The OLT supports the following MIBs:

• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• IEEE 802.3ah OAM
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, 

RFC 2012 SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP

30.3.2  SNMP Traps

The OLT sends traps to an SNMP manager when an event occurs. SNMP traps supported are 
outlined in the following table. 

30.3.3  Configuring SNMP 

From the 

Access Control 

screen, display the 

SNMP 

screen. You can click the 

Access Control 

link

 

to go back to the 

Access Control 

screen. 

Table 71   

SNMP Commands

COMMAND

DESCRIPTION

Get

Allows the manager to retrieve an object variable from the agent.

GetNext 

Allows the manager to retrieve the next object variable from a table or list within an 

agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an 

agent, it initiates a Get operation, followed by a series of GetNext operations. 

Set

 Allows the manager to set values for object variables within an agent. 

Trap

 Used by the agent to inform the manager of some events.

Table 72   

SNMP Traps 

OBJECT LABEL

OBJECT ID

DESCRIPTION

SNMPv2 Traps

Cold Start

1.3.6.1.6.3.1.1.5.

1

This trap is sent when the OLT is turned on.

WarmStart

1.3.6.1.6.3.1.1.5.

2

This trap is sent when the OLT restarts.

linkDown

1.3.6.1.6.3.1.1.5.

3

This trap is sent when the Ethernet link is down.

linkUp

1.3.6.1.6.3.1.1.5.

4

This trap is sent when the Ethernet link is up.

authenticationFailure

1.3.6.1.6.3.1.1.5.

5

This trap is sent when an SNMP request comes from 

non-authenticated hosts.

Содержание OLT-1308



























































































































































































































































































































Отзывы:

Нет отзывов