ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 65

Страница: 65 / 314

Chapter 6 System Status and Port Statistics

OLT-1308 Series User’s Guide

The following table describes the labels in this screen.

Table 10

Status: EPON Info: EPON Details

LABEL

DESCRIPTION

LLID Info

LLID No

This field displays the index number of the logical link.

Status

This field shows the logical link status.
This field displays

if an ONU is connected.

This field displays

Down

if an ONU is not connected or is not ready.

This field displays

Testing

if you are performing s diagnostic test on the link

(using the

Diagnostic

screen).

The following lists the five

states:

Normal

- when the ONU is transmitting traffic.

Queuing

- when the ONU is waiting for the firmware upgrade.

Upgrading

- when the ONU is upgrading its firmware.

Upgrade Fail

- ONU firmware upgrade has failed. In this case, reset the

ONU.

Upgrade Success

- ONU firmware upgrade is completed without errors.

The ONU will restart automatically and the state changes to

Normal

EAP State

This field displays the IEEE 802.1x supplicant EAP status.

MAC Address

This field displays the MAC address of the ONU on this logical link.

Minimum Upstream

Bandwidth

This field displays the minimum upstream bandwidth in Mbps.

Maximum Upstream

Bandwidth

This field displays the maximum upstream bandwidth in Mbps.

Maximum

Downstream

Bandwidth

This field displays the maximum downstream bandwidth in Mbps.

RTT

This field displays the Round Trip Time (RTT) in nanoseconds.

OLT SW Version

This field displays the firmware version the OLT uses.

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 65 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: