ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 151

Страница: 151 / 314

Chapter 20 Multicast

OLT-1308 Series User’s Guide

151

Figure 59

MVR

The following table describes the related labels in this screen.

Table 50

MVR

LABEL

DESCRIPTION

Active

Select this check box to enable MVR to allow one single multicast VLAN to be

shared among different subscriber VLANs on the network.

Name

Enter a descriptive name (up to 32 printable ASCII characters) for identification

purposes.

Multicast VLAN

Enter the VLAN ID (1 to 4094) of the multicast VLAN.

Mode

Specify the MVR mode on the switch. Choices are

Dynamic

and

Compatible

Select

Dynamic

to send IGMP reports to all MVR source ports in the multicast

VLAN.
Select

Compatible

to set the switch not to send IGMP reports.

Port

This field displays the port number on the switch.

Source Port

This field is applicable for

Ethernet

ports.

Select this option to set this port as the MVR source port that sends and receives

multicast traffic.

Receiver Port

Select this option to set this port as a receiver port that only receives multicast

traffic.

None

Select this option to set the port not to participate in MVR. No MVR multicast traffic

is sent or received on this port.

Tagging

Select this checkbox if you want the port to tag the VLAN ID in all outgoing frames

transmitted.

Add

Click

Add

to save the settings.

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 151 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: